Galaxy-audio HSVC Hotspot Yoke Bracket Bedienungsanleitung PDF herunterladen

MAKERS OF THE ORIGINAL HOT SP T PERSONAL MONITOR O

GALAXY AUDIO YOKE BRACKET INSTALLATION INSTRUCTIONS

DESCRIPTION:

Galaxy Audio Yoke Brackets are used for permanently mounting HOT SPOT, MICROSPOT, and

CHAMELEON loudspeakers to walls and ceilings . The mounting angle can be adjusted by simply

loosening the wing screws at either end of the yoke and by loosening the bolt where the yoke mounts

to the wall plate. These brackets should be used only on a flat, secure, and stable surface.

Note: If you are retrofitting a bracket to a Hot Spot that does not have T-nuts installed, please

see the insert “Installing T-nuts for Galaxy Yoke Bracket.”

PRECAUTIONS:

Whenever an object is affixed to a wall or ceiling, you must take special care to mount it securely to

prevent it from falling and causing damage or injury.

MOUNTING SURFACES: Carefully examine the composition, construction and strength of the

surface you are mounting to. Be sure to provide adequate reinforcement should you deem it

necessary. You must also consider what type of hardware and what type of mounting techniques are

appropriate for each mounting surface.

FASTENERS: Attaching the bracket requires fasteners selected for the strength and composition of

the mounting surfaces involved. Whatever fastener is selected, it should be no smaller than a #8

screw or 1/4" bolt. When drilling pilot holes be sure that the holes are smaller than the core diameter

of the screw. Always use fasteners in all mounting holes and avoid over tightening, as this can

weaken the mounting surface, damage the fasteners, and make the installation much less secure.

SECONDARY SUPPORT: As we recommend the use of a secondary support for added safety, each

yoke bracket is equipped with a safety cable. When properly installed it provides secondary support

without inhibiting the adjustment of the bracket, and can be easily hidden out of sight.

MOUNTING PROCEDURE:

PREVIEW: After evaluating the mounting surfaces and obtaining the appropriate fasteners, the

installation will consist of the following steps, in order:

1. Mounting the bracket plate to the wall or ceiling.

2. Bolting the yoke to the plate.

3. Joining the cabinet with the bracket assembly.

4. Installing the safety cable.

5. Adjusting the speaker position and tightening the yoke bolt and wing screws.

TOOLS REQUIRED: You will need at least these tools for installation:

7/16" box end wrench

large crimping pliers

tools to secure the fasteners selected for the bracket assembly (drill, screwdrivers, etc.)

carpenter's level for precise positioning of the speaker. (optional)

Note: It is often helpful to have another person available to hold the speaker in place during

the tightening procedure.

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1

MAKERS OF THE ORIGINAL HOT SP T PERSONAL MONITOR OGALAXY AUDIO YOKE BRACKET INSTALLATION INSTRUCTIONSDESCRIPTION:Galaxy Audio Yoke Brackets are used

Seite 2 - 1-800-369-7768

INSTALLATION:ATTACHING THE BRACKET ASSEMBLY TO THE MOUNTING SURFACE:Position the bracket assembly onto the wall or ceiling at the location you have se

Seite 3

INSTALLING T-NUTS FOR GALAXY AUDIO BRACKET1. Remove six screws from bezel on front of unit. If installing on a PA5XD remove nut and one

Seite 4

4CENTER1"T-NutHoles5/163"1"Safety Cable Clamp Hole 5/32"ILL.#1ILL.#2

Seite 5 - T-Nut Hole Template

T-Nut Hole Template5

Seite 6 - Stand Adaptor Hole

Stand Adaptor Hole5/32 Safety Cable Hole Location6

Kommentare zu diesen Handbüchern

Keine Kommentare

Galaxy-audio HSVC Hotspot Yoke Bracket Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Audio-Zubehör Galaxy-audio HSVC Hotspot Yoke Bracket herunter. Galaxy Audio HSVC Hotspot Yoke Bracket User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audio-Zubehör Galaxy-audio HSVC Hotspot Yoke Bracket